国产成人精品一区二三区,白嫩少妇激情无码,人妻无码αv中文字幕久久琪琪布

Home | 設為首頁 | 加入收藏 | English
產品展示 | Products 更多
Carbide Rods A Series/硬質合金棒材
Carbide Rods G Series/硬質合金棒材
Carbide End Mill/硬質合金立銑刀
Tungsten Carbide Powde/碳化鎢粉末
Drill Aluminum SiC/整體PCD鉆頭
PCD Composite Sheet/PCD復合片
新聞中心 | News 更多
PCD composite sheets/PCD復合片
Carbide rods export is stable /硬質
Chinese Customers Like EXE End Mil
在線留言 | Message 更多
    歡迎您使用在線留言系統給我們留下寶貴的意見和建議!
Carbide Rods AK Series/硬質合金棒材

Cemented Carbide Rods AK Series

Introducing the advanced technology and equipment.

High-quality, self-produced raw materials.

Produced cemented carbide rods for more than 30 years.

■Tool rods grade introduction

YK106: Made of fine-grained raw materials, it has excellent adhesion to diamond coatings and is suitable for processing graphite products (coatings are required).

YK15: More than 30 years of classic fine-grained grades, the market uses tens of thousands of KG. Good impact resistance and versatility. Suitable for rough machining and finishing of general metal materials, 50HRC and below steel, cast iron, aluminum alloy.

YK20: Improved YK15, suitable for roughing and finishing, 52HRC and below steel, cast iron, aluminum alloy.

YK25: Good wear resistance, excellent toughness and strong versatility. Suitable for roughing and finishing, 60HRC and below carbon steel, die steel, 316L stainless steel.

YK30: Suitable for low speed cutting and medium speed cutting and drilling, 55HRC and below 303, 304 stainless steel, alloy steel.

YK25: Sub-microcrystalline alloy grade, good wear resistance and excellent toughness. Suitable for high-speed cutting of high-hardness materials, it is especially recommended to make contour tools and high-light tools.

■PCB rod grade introduction

YSF10A: Submicron grain, with high strength and hardness, excellent wear resistance and impact resistance. It is recommended to make PCB drills with diameters of 0.7 and above.

YSF20A: Ultra-fine grain with high hardness and high strength. It has excellent wear resistance, impact resistance, strength and rigidity for various PCB sheet processing. Suitable for making PCB micro drills and micro milling cutters. It is recommended to make PCB milling cutters with a diameter of 0.8 and above.


硬質合金棒材AK series:

■引進先進工藝及設備。

■采用高品質自主生產的原料。

■生產硬質合金棒材30多年。

工具棒牌號介紹:

YK106: 細粒度原料制成,對金剛石涂層有絕佳附著力,適合加工石墨制品(需涂層)。

YK15: 30多年經典細粒度牌號,市場應用數萬KG。良好的抗沖擊性,通用性強。適合通用金屬材料的粗加工和精加工,50HRC及以下鋼材,鑄鐵,鋁合金。

YK20:  YK15的改進型,適合粗加工和精加工,52HRC及以下鋼材,鑄鐵,鋁合金。

YK25: 耐磨性好,韌性優異,通用性強。適合粗加工和精加工,60HRC及以下碳素鋼、模具鋼、316L不銹鋼。

YK30: 適合低速切削和中速切削以及鉆孔加工,55HRC及以下303、304不銹鋼、合金鋼。

YK25A:  亞微晶合金牌號,耐磨性好,韌性優異。適合高硬度材料的高速切削,特別推薦制作輪廓刀,高光刀。

PCB棒材牌號介紹:

YSF10A: 亞微晶粒,具有較高的強度和硬度,耐磨性和抗沖擊性優良。推薦制作直徑0.7及以上PCB鉆頭。

YSF20A: 超細晶粒,具有高硬度和高強度。對各種PCB板材加工具有優良的耐磨性,抗沖擊性,強度和剛性。。適合制作PCB微型鉆頭,微型銑刀。推薦制作直徑0.8及以上PCB銑刀。

渝ICP備14005496號-2 重慶伊科斯精密機械有限公司 Copyright © 2010 版權所屬